2018 Viking 48' Chairman

• Ablative/copolymer anti-fouling bottom paint, 2 coast, primed
• Awlgrip brass thru hulls in engine room forward bilge
• Awlgrip engine room, lazarette, forward bilge and anchor locker for enhanced visibility and easier maintenance
• Custom blended polyester resin used in structural laminates, topsides, bridges and hardtops
• Fiberglass side thru hulls
• High gloss Teak interior finish throughout
• High performance isophthalic gelcoat npg superior gloss, flexibility and outstanding weathering characteristics
• Hull interior, isophthalic gelcoat top coated with a durable high gloss polyurethane coating
• Hull resin infused cored composite construction, using end-grain balsa and closed cell foam cores in selected areas for optimized strength and stiffness while minimizing weight
• Infused fiberglass fuel, water and holding tanks with fiberglass baffles inside and balsa coring on sides for stiffness, sealed to hull with resin foam
• Molded fiberglass command deck/engine room ceiling with foam core for acoustical and thermal insulation
• Nonskid molded in for traction and durability
• Stringers, fiberglass encapsulated foam
• Vacuum bagged composite bulkheads - main engine room bulkhead, intermediate engine room bulkheads, and forward bulkhead
• 3-Sided hard helm enclosure

• Fiberglass enclosure, three sided
• LED spreader lights, forward and aft
• Multi-Color overhead lights at helm and tower
• Overhead storage lockers integrated into top and faired in for rod storage – additional gas shock added for support, custom rod mounts
• Radar pod
• Miya US 9 teaser reels
• Windshield, molded wrap around front and sides with fixed laminated glass
• Windshield wipers with washer and speed adjustment

• Custom sound proofing in command deck laminate
• 12V and 24V Cockpit plugs for electric reels
• Overhead rod lockers
• Teaser reel box
• Helm air conditioning
• Upgraded ultraleather helm chairs with chrome pedestals
• Refrigerator/freezer box
• Two U-Shaped dinettes
• Custom helm carpet
• Ultraleather, sea grass
• Light tint on side windows
• Release Teak helm pod
• (3) Release Marine helm chairs, 2 with footrests
• Electronic single lever controls
• Compass, large, flush mounted and lighted
• Controls: Top mounted electronic controls with station select and keypad
• Electronic trolling valves
• Fire system control with automatic and manual discharge and override system located at console
• Furuno RD-33 depth finder/sea temperature gauge ICOM 604 radio
• Gauges/electronic displays supplied by engine manufacture
• Single chairs at port companion with starboard companion
• Instrumentation based on starboard engine package, lighted with switches in radio box
• Manual engine shutdown switches at cabinet in console
• Dockside electric connection - 50 amp/ 220V electric retractable Glendinning Cablemaster (1), located in starboard cabinet under forward gunwale and (1) 50 amp 220V inlet with push release door
• Dockside water connection with pressure reducing valve in port or starboard cabinet under forward gunwale
• Engine room access with door and ladder
• Engine room entrance with gas pistons
• Freshwater wash down with hose bib located in cabinet under forward gunwale
• Gaskets for all lids, doors and access doors
• Lazarette hatch with access to steering trim tabs, drain pumps
• Lighting, recessed tri color (red, white, blue) lights in flybridge overhang
• Live well in transom box without window and light
• Molded non-skid deck
• Observation mezzanine, aft facing lounge seating with Sunbrella covered cushions, hinged seats with storage under
• Recessed in deck fish box, live well tub and dunnage box insulated and removable with pump out and drain plate with large holes for easy pump out and cleaning
• Rod holders, Rupp (4) flush mounted
• Seawater wash down with pump in engine room and supply at cabinet under forward gunwale to keep deck clean while fishing
• Self bailing cockpit with large cockpit scuppers
• Stainless steel cleats and recessed hawse pipes
• Stainless steel gas pistons on all hatches and lids
• Stereo speakers powered from salon stereo with remote control
• Offshore Systems monitoring with audible and visible alarms: fire, engine room temp, high bilge water, high exhaust temp, high coolant temp, low oil pressure, and generator as well as confirming correct system operation
• Power assist steering
• Recessed radio box, large on starboard sides of console with switch panel inside painted satin black
• Stereo speakers, recessed
• Storage cabinets
• Trim tab control switch mounted at console
• Trumpet style air horns, (2)
• Two U-Shaped lounge seating with Ultra-leather cushions and teak tables
• VHF Radio with antenna and mounts
• Windshield, molded fiberglass wrap around front and sides with fixed frameless laminated glass
• Windshield wipers with washer and speed adjustment
• LED Spreader lights
• Overhead lights at helm
• Overhead storage lockers integrated into top
• Radar pod
• Lights in hardtop
• Lights in aft deck overhang
• Outriggers, Rupp
• Center Rigger
• Windlass
• New JL audio speakers

• (3) Garmin 7616 flat screen multi-function displays Garmin Radar 2524 XHD2 25KW High
• Definition Garmin Plotter 7616 GPS MAP
• Preloaded charts
• Garmin remote input device
• Plotter can be viewed on salon TV and cockpit monitor Sounder Garmin GSD 26 Chirp module AirmarPM275LHW wide beam transducer
• Furuno RD 33 digital Depth recorder GHP Reactor Autopilot
• (2) ICOM M506-31 VHF Radios
• Fusion MS-UD 750 Marine Stereo JL Audio Speakers
• Garmin AIS-600 AIS Transponder
• Aigean Networks AN-2000 marine WIFI system
• XM Radio/Weather Antenna
• KVH Tracvision TV 5 Satellite TV antenna GOST cockpit and engine room camera GOST
• Nav Tracker System
• GOST alarm system EPIRB
• Lumishore underwater lights 4 on transom, 2 facing down blue and white lights

Tower Electronics:

• Garmin 7608 8’’ Multifunction display
• ICOM MH 195B VHF radio
• (2) Command mic extensions

• Palm Beach Towers Tuna Tower
• (2) Antenna Standoff
• Molded One Piece Standing Platform
• Molded 2-in-1 LED spreader light pod molded aft
• Molded single LED spreader light pod molded forward
• Molded LED nav lights in platform, port and starboard
• Control box 63” with flush mounted compass
• Recessed Electronics boxes in control box
• Tower sunshade molded top welded antenna mounts
• Molded SAT dome mount
• (6) Rod holders polished welded to aft rail
• (6) Rod holders polished welded to aft tower legs
• Rupp outriggers 34’, 2 spreaders, solid large back bar
• Rupp center rigger
• Controls and steering, top mount control
• Bench seat with backrest
• Freshwater washdown
• Trim tab switch mounted on control box
• Masthead/anchor light mounted on tower sunshade
• Recessed tri-color lights in platform
• Recessed tri-color lights in tower sunshade
• Removable swim ladder

• Teak deck and mezzanine
• Transom coaming with gate and fish box
• Refrigerated mezzanine port and starboard, boxes and refrigerated mezzanine step
• Release Marine Teak, six rod battle saddle
• Tri-color rope lighting under gunnels
• Plum transom as live well/fishbox
• (6) Rod holder tower legs
• (2) Large fish boxes
• (4) Rod holders
• 50 amp Glendinning Cablemaster
• Cable TV and telephone connections located in starboard dock cabinet and wired to a home run
• Cabinet with storage for gaffs and or other accessories located under gunwale
• Transom swim steps at transom door
• Walk-through transom door with lift gate
• Y-Valve for fresh and saltwater wash downs
• (2) 24 Volt and (2) 12 volt plugs in cockpit

• LP 12/24 V converter for electric reels
• 12 and 24V outlets in cockpit
• 24V DC ship's service throughout
• 12/24V Power supply with breakers on flybridge for future electronics
• 110V Outlet in engine room n aft bulkhead
• Anchor light/navigation lights
• Batteries, (2) independent 24V banks mounted in fiberglass storage box
• Battery chargers, (2) with thermal cutoff and switching system for complete integration
• Battery distribution panel with battery cutoff and charging system breakers
• Battery parallel system for main engines and generator start
• Onan Generator
• Bonded electrical system with ground plate
• Color-coded, labeled and numbered wiring system with corresponding drawings
• Dimmers 24V DC interior lighting throughout
• Engine room lights, DC with switch at engine room entrance
• Glendinning Cablemaster with (3) wire grounded cord, (1) Additional 50 amp/220V inlet with 50' cord
• Instrumental panel lights for flybridge and main electric panel
• Lighting, overhead LED lights recessed in ceiling and rope type decor lights, 24V throughout
• Master electrical control panel located in salon with 24V/120V circuit breakers, individual switching for shore 1, shore 2, or generator supply and gauges for electrical supply, voltmeter, amp meter and frequency
• Receptacles, 120V duplex with GFI throughout
• RG6 TV cable to accommodate satellite system
• Voltage stabilizer isolation transformer on cable masters for more consistent, cleaner voltage

• Eskimo ice machine with discharge into fishbox
• Sea Recovery 700 gpm Watermaker with remote display and auto backflush
• Hydraulic bow thruster
• ZF JMS with joystick control and station keeping ability
• SeaKeeper gyro stabilizer, SK9
• Head Hunter head system
• HeadHunter fresh water pump
• Air conditioning - direct expansion zoned with reverse cycle heat for complete climate control throughout the interior and with individual temperature controls for staterooms and salon
• A/C pressurized freshwater system with on deck freshwater fill and cockpit dockside supply inlet with pressure reducing valves
• Bilge pumps linked into monitoring system and connected to switches for automatic and manual operation
• Centralized seawater supply system with distribution manifold for seawater cooled systems and live wells
• DC power-assist hydraulic steering independent of engines
• Deck pump out fitting and direct overboard pump out for holding
• "Delta T" engine room ventilation system with supply and discharge fans for proper fresh air supply and water intrusion suppression
• Engine room entrance package consisting of gauges for digital tachometer, engine water temperature, engine oil pressure and engine room mounted engine start and stop switches for easier viewing and accessibility
• External sea strainers for main engine pick ups
• Fire suppression system, automatically or manually operated and tied into main engine and generator ignition systems with override
• Fresh water supply in engine room for general maintenance and cleaning
• Fuel and oil lines, flexible, steel reinforced USCG approved
• Fuel priming pumps electric 24V electric
• Fuel transfer system, 24V DC pump
• Hour meters on main engines and generator
• Internal sea strainers for generator and all other sea water pick ups
• Mufflers - engines, in-line type with surge tubes in engine room
• Mufflers - lift generators with gas water separator for cleaner, quieter operations
• Oil changing system, gear type pimp for main engines, transmissions and generator with pump out line run to cockpit
• PEX plumbing, freshwater system plumbing with manifold system shut off in engine room and forward bilges
• Propellers - Class "S" pitch tolerance (ISO 484/2) and dynamic balancing. Advanced design cambered blade sections for optimum performance. Nibral alloy for maximum durability
• Racor fuel/water separator filters for main engines and generator clear bowl type, top loading for convenient replacing - includes vacuum gauge for fuel filter restriction - Awlgrip white
• Rudders, stainless steel, with composite rudder bearing and drip-less thru-water and Tides Marine UHMW bearing for ease of maintenance
• Seacocks, bronze, ball-type sea valves and strainers for all thru-hulls below the water line - Awlgrip white
• Shafts - 2 Aquamet high-strength stainless steel, double-taper with machined keyway and thrust plate at main engine couplings
• Struts - thru-water, Nibral
• Trim tabs, dual piston with individual controls with the trim tab covers on transom
• Twin diesel engines with marine grade reduction gears.
• Water heated quick recovery, electric
• Y-Valve emergency bilge pumps (2)

• Custom Dove Grey hull color
• Custom bow lounge seating
• Anchor - constructed with a high-tensile, corrosion resistant aluminum magnesium alloy
• Anchor locker with access from foredeck
• Anchor rode, 50’ chain, 250’ rope
• Awlgrip bilge areas with access hatches, snow white and lighted using magnetic switches for easier maintenance and cleaning
• Bow rail, anodized aluminum
• Fire extinguishers
• Magnetic switches for light in all forward bridge compartments
• Mooring lines, 3 strand, nylon (6)
• Painted rub rail
• Ships bell
• Stainless steel bow, spring and stern cleats thru-bolted to aluminum backing plates
• Viking Prestige Decor package
• Zinc on transom
• Cockpit fly cover
• Bow pulpit and bow rail

• Fishing Tackle

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.

Listing MLS by Yachtr.com