Search All Yachts
Phantom is a 2 owner, well equipped and maintained version of the very popular Beneteau 473 Model with a 3 state room and 3 head layout, the hull has been repainted, and a bow thruster was added in 2024.
Powered by a reliable Yanmar Diesel Engine and a Fisher Panda Diesel Generator.
The boat was built in France and was purchased by the current owners in 2020
The Beneteau 473 was named Cruising World’s Best Production Cruiser in 2001. The Beneteau 473 combines extraordinary interior comfort, volume, and light with bluewater strength. This design offers a unique combination of elegant lines with extraordinary space and performance. The 473 also boasts a large array of features and creature comforts not normally found on a boat of this size.
Specifications
Spacious Salon with an open galley, three full heads, three cabins, and a navigation station with beautiful cherry wood work throughout. There are two guest cabins aft and up forward in the bow is the master stateroom with a double island berth and a seat to port. There is plenty of storage with two shelves along the hull, one drawer under the berth, a large hanging locker and shelving with slotted doors to port and starboard.
The Forward Head is located on the starboard side. It is accessible from the owner's cabin. The head has a separate shower with folding doors, Raritan Marine Elegance fresh-water electric flush toilet (2012), 30-gallon holding tank, mirror–fronted cabinet, one opening hatch, and a cabinet under the sink. There is a U-shaped seating area in the Salon to starboard with an expandable salon table mounted on aluminum legs with extensions. The seating area and table convert to a double berth. Storage is available under the seating and outboard.
The functional Galley is adjacent to the Salon on the vessel's port side. It features a stainless steel 4-burner propane stove with oven, a large counter, double stainless steel sink, Dometic/Grunert top opening freezer and front opening refrigerator (2014), hot/cold water, separate filtered drinking water (2025), draining rack, and two 230 V outlets.
The Nav Area is aft of the salon on the starboard side. There is a chart table, seat, and space for electronics (chart plotter/radar and VHF).
There are two symmetrical Aft Cabins, each with:
Finally, there are two Aft Heads, each with:
Sails and Rigging Sloop Rig with an Anodized Aluminum Mast and Boom with a Furling Genoa and Full Batten Mainsail. All Sheets and Furling Lines are Led Back to the Cockpit for Ease of Use.
The Large aft cockpit features twin helms, a swim platform, and a double-leaf table.
The deck of the Beneteau 473 is easy to safely navigate thanks to wide side decks, recessed hatches, double lifelines, and hand rails. Some features include:
Mastervolt Mass Combi 12/2500-100 sine wave inverter/charger system integrated with solar power cells on arch, with engine alternator charging system, shore power, and generator (2012)
The single-skinned hull is of GRP construction. The structure is reinforced at various points (keel, rudder, chain plates, deck line, etc.). A structural single-skinned inner molding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (chain plate tie rods, keel, rudder, etc.) and spreads any loads, guaranteeing reduced strain on the hull. The surface of the inner molding makes cleaning easier and provides a better finish.
The deck comprises sandwich (fiberglass/balsa) construction for an optimal strength/weight ratio and excellent thermal and sound insulation. A ‘diamond point’ non-slip surface increases safety over all areas of movement on deck.
The hull/deck joint is secured by way of a bonded and screwed teak bulwark. This mechanical assembly ensures the hull/deck joint is watertight and provides extra safety while moving about.
The keel is cast iron. It is attached to the boat by a system of screws and stainless steel backing plate and bonding. To improve the durability, the keel is given anti-corrosion treatment and improved finish in the factory before assembly, using epoxy-based coatings and paint. Single Rudder with glass composite stock.
Hull Color: Graystone Awlcraft 2000
Stripe: Dark Green - Sea Green Awlcraft 2000
Bottom Paint: Interlux Ultra
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Listing MLS by Yachtr.com
Not all boats listed online are listed with United, but we can work on your behalf. For more information on this vessel or to schedule a showing, please contact a United Yacht Sales broker by calling our main headquarters at (772) 463-3131.
SELL YOUR YACHT WITH UNITED
United is the largest professional yacht brokerage firm in the world with over 200 yacht brokers in our network. By listing your boat or yacht for sale with us, all of our team are immediately notified of your boat and begin working to match your yacht with a buyer. We have many examples where boats have sold through our network and our proprietary broker forum that keeps our team connected 24/7. With hundreds of closings every year, there is no better team than United to help with the listing and sale of your vessel. Find out what your current yacht is worth on today's market!
FINANCE NOWBUY A YACHT WITH THE UNITED TEAM
The yacht MLS consists of thousands of available brokerage vessels from all over the world and in different conditions. Hiring an experienced yacht broker to help you find the perfect boat makes financial sense, as well as takes the stress out of the process. A United broker starts by listening to your needs, how you plan to use your boat, your potential boating locations, and your budget. We then go to work looking at all of the available yachts that fit your criteria, research their history, provide you with a clear picture of the market, and organizes the showings. We're with you every step of the way from survey to acceptance and our industry-leading support staff will make sure your closing goes smoothly.